KZ5 Cutting Drilling Rig

"Kaishan" K25 cutting drilling rig is advanced drilling equipment integrating cutting drilling system and screw air compressor system. With compact structure, it is well integrated and easy to move. It is hydraulically driven to complete actions, such as walking, feed, rotation, dust collection and angle adjustment and it has strong climb capacity and stable performance; it is equipped with hydraulic dry dust collector to collect dust and reduce pollution to the environment.

"Kaishan" KZ5 cutting drilling rig is mainly used for drilling in hard pan or soft rock in rotary cutting way and it uses compressed air for discharging and dust collector for collecting dust. If there is harder rock, it can also drill holes with pneumatic impact method.

Main advantages of drilling rig are as follows:

1. Drill boom dedicated for the drill can adjust drilling angle flexibly to drill vertical, left and right tilting, and front and back tilting holes.

2. It is directly connected to the screw compressor with large flow (5m3/min) to realize smooth discharging and fast drilling speed. If there is hard rock, air hammer can be used to make it well-adapted.

3. It is equipped with ±10° automatic leveling equipment on the chassis. The leveling cylinder can be used together with the switched double locking system and left and right crawlers contact the ground uniformly, thus the drilling rig is more adapted to rugged working ground.

4. Efficient two-stage dry dust collection system significantly improves the working environment and conforms to environmental protection policy.

5. With long stroke guide (stroke up to 4m), it has better blasting effect for drilling with single rod.

6. Highly integrated hydraulic control system is arranged in the cab to provide comfort working environment.

7. With high speed rotator with the speed of 0-400r/min, the drilling rig is efficient in drilling.

8. The drilling rig is equipped with real-time monitoring system and stable self-protection system to reflect the working state of the drilling rig accurately. An alarm will be given when the set range is exceeded, and the rig can stop automatically when any fault occurs.

Technical Parameters of KZ5 Cutting Drilling Rig

Rock rigidity

Cutting drilling ≤6; Impact drilling f=6-12

Drilling diametermm

76-115

Economic drilling depth (m)

4

Travel speed Km/h

2.0

Climbing capacity

30°

Ground clearancemm

430

Total Power kW

92

Diesel

YuchaiYC4A125Z-T21(A7GF0)

Displacement of screw compressor m3/min

5

Discharge pressure of screw compressor bar

7

Dimensions (long×width×high)mm

8000×2260×2700

WeightKg

8500

Rotation speed r/min

0-400

Rotary torque N*m

960

Max. feed force N

25000

Guide lifting angle

Up28° down42°

Guide tilt

129°

Guide swing

Right38° left35°

Lateral horizontal guide swing

Right4°~89°

Boom swing

Right10° left60°

Frame balance angle

Up10° down9°

Feed length at a timemm

4000

Compensation lengthmm

900

Dust catching method

Dry-type (hydraulically driven whirlwind layer flow type)

Drill rod

Φ64×4000mm

Welcome to send your message to us
*Email
!!
*Content
!
Product Name
Your Name
Company
Tel/Fax.
Msn/Skype
RSS Sitemap